The spread of algae is not only limited to the walls and the pool floor, but also spreads to other utensils such as the pool hose. If it has become overgrown with algae inside, simple measures can help clean it.
How to remove algae from a pool hose?
To remove algae from a pool hose, use a cleaning brush, rinse the hose, use vinegar or chlorine as a cleaning agent and brush off the algae. A mixture of sand and water can help with stubborn algae.
How can algae be removed from the pool hose?
To completely free the pool hose of algae,Cleaning brushes should be used. These special brushes for cleaning hoses have soft bristles made of plastic, which do not damage the material of the hose, but still clean thoroughly. This is a hygienic and reusable way to clean the pool hose without leaving any residue. The best way to do this is as follows:
- Connect the hose to a water supply and rinse it several times.
- Then carefully insert the hose brush into the hose.
- You can use a little vinegar or chlorine as a cleaning agent.
- Move the brush up and down inside to remove any residue.
- Finally, you should rinse the hose again.
As an alternative to this procedure, you can also subject the hose to shock chlorination. Place it in a chlorine solution for a few hours and then rinse it well.
Can the formation of algae in the pool hose be prevented?
Unfortunately, the formation of algae inside a pool hose cannotbe completely prevented. However, there are preventive measures that can largely counteract overgrowth. Regular flushing of the hose is particularly important. This makes it difficult for the algae to attach to the inside. A narrowing of the hose diameter is thus avoided. Furthermore, algae can multiply particularly quickly in a warm and humid environment, especially after winter. Therefore, keep the hose away from direct sunlight.
Can algae be completely removed from the pool hose?
Pool hoses can usually be completely removed from algae. With the help of special cleaning utensils, a standard pool hose can usuallybe rinsed and brushedeasily. If residue remains, the process must be repeated again. Simple home remedies can also be used here. Completely cleaning the hose can take some time and should be carried out at regular intervals.
Tip
Sand against algae in the pool hose
If the algae are particularly stubborn, a mixture of sand and water can help. To do this, simply fill some sand and water into the hose and close both openings. By shaking the hose vigorously several times, the algae will usually be completely removed from the inside.
