If the pool water noticeably changes, the cause should be urgently investigated. The right cleaning and care measures can usually combat the problem quickly and without much effort. If red algae is detected in the pool, the water usually does not need to be completely changed.
How to remove red algae in the pool?
Red algae in the pool can be effectively removed by regularly checking the pH value (ideal value between 7.00 and 7.40) and cleaning measures such as brushing, algae removal, shock chlorination and covering the pool. They do not pose a he alth risk, but do affect water quality.
How can red algae be recognized in the pool?
Red algae can be easily recognized by other types of algae due to theirunmistakable red coloring. These are among the most stubborn species and therefore require more complex treatment. These primarily settle on the pool floor and walls. The removal requires a little patience, but can be done without leaving any residue with simple care measures.
Can red algae be completely removed from the pool?
If algae appears in the pool, you don't necessarily have to change the water completely. The red algae can becompletely removed. Simple cleaning measures help to remove the growth without leaving any residue. The best way to do this is as follows:
- Measure the pH of the water.
- Remove the algae with a soft brush.
- Remove the plant from the water.
- Perform shock chlorination.
- Recheck the pH and chlorine levels.
- Let the pool pump run for a few hours.
- Cover the pool with a tarp.
Is red algae dangerous in the pool?
Algae are generally consideredsafe Red algae also do not pose a he alth risk. Bathing in the pool does not necessarily have to be stopped. However, the spread should still be contained, as further growth of the plant can gradually make swimming more difficult. Diving should also be avoided in this case, as visibility can be severely restricted. In addition, algae develop foul-smelling gases after a while, which should not necessarily be inhaled.
Tip
The correct pH value can prevent the formation of red algae in the pool
The pH value is particularly essential for maintaining clear and hygienically clean pool water. For this reason, this should neither be too low nor too high. Therefore, check the value at regular intervals to prevent algae infestation. The measured value should always be between 7.00 and 7.40. If this value deviates, you should regulate it immediately.
