Algae in the pool despite a sand filter system: causes & solutions

Table of contents:

Algae in the pool despite a sand filter system: causes & solutions
Algae in the pool despite a sand filter system: causes & solutions
Anonim

A beautiful pool in the garden delights young and old alike. However, this enthusiasm can be dampened by the appearance of algae. If algae occurs despite the use of a sand filter system, the cause should be inspected more closely in order to solve the problem as quickly as possible.

algae-in-the-pool-despite-sand-filter-system
algae-in-the-pool-despite-sand-filter-system

Why do algae appear in the pool despite a sand filter system?

Algae in the pool despite a sand filter system can be caused by incorrect pH or chlorine content values, dark spots on the pool liner or poor water hygiene. To remedy the situation, the system should be cleaned weekly and the filter backwashed.

Why do algae appear in the pool despite a sand filter system?

If algae grows in the pool despite the use of a functioning sand filter system,various problems can be cited as triggers. It is particularly important to control the pH value and the chlorine content. These values should be neither too high nor too low to ensure long-term optimal water condition. Also take a closer look at the pool liner. Look out for dark spots, which could have triggered the algae infestation. Also monitor the hygienic condition of your pool water; the water may need to be cleaned.

How should you maintain the sand filter system if there is algae in the pool?

If algae appear in the pool despite optimal values and it is not a simple maintenance error, the sand filter system should be examined a little more closely. CleaningFirst clean them thoroughly and check that they are working properly. You should then carry out a so-calledfilter backwashing. This can be done in simple steps:

  1. Switch off the sand filter system.
  2. The valve should assume the backwash position.
  3. Then connect a hose to the filter system.
  4. Open the wastewater valve.
  5. Now switch the pump back on.
  6. The final step is rinsing and filtering.

Tip

Weekly cleaning in case of algae formation in the pool despite the sand filter system

In order not to unnecessarily restrict the function of the sand filter system, it should be cleaned at least once a week. Weekly filter backwashing is also recommended. This transports the dirt out of the system and ensures smooth operation. This is extremely important when fighting algae in the pool and should therefore not be neglected.

Recommended: