Cleaning and maintaining the pool is a daily chore for many swimming pool owners. However, even with regular care, the pool can become infested with undesirable growths such as white algae. In this case, action should be taken as quickly as possible.
How do I remove white algae from the pool?
To remove white algae in the pool, check the pH value, remove algae deposits, fish out dead algae, carry out shock chlorination, check the water parameters again and run the sand filter system for several hours.
How to remove white algae from the pool?
The elimination of white algae in the pool should be done as early as possible and usingimportant measures to prevent further spread. You should proceed as follows:
- Be sure to check the pH value of the pool water.
- Remove all algae deposits from the pool floor and walls. You can use a soft brush (€34.00 on Amazon) to do this.
- Fish all dead algae from the pool.
- Afterwards, clean the pool using shock chlorination.
- Check the water values again.
- Let the sand filter system run continuously for a few hours.
The algae should also be removed from the pool liner.
What characteristics do white algae have in the pool?
White algae and white flakes are particularly easy to recognize in the pool. The plant can be distinguished from other algae variants due to itslight to white color. White flakes are a collection of dead white algae.
Can you counteract the growth of white algae in the pool?
Regular cleaning and maintenance of the pool can be used to counteract anyalgae formation To do this, remove all impurities such as leaves and dead plant residues from the water. You should also keep an eye on both chlorine levels and pH levels. A high or low pH value of the pool water greatly promotes the formation of algae. Also carry out a cleaning shock chlorination every now and then.
Tip
Ecological remedies against white algae in the pool
If white algae colonize the pool, you can also use inexpensive home remedies to combat it. A commercially available vinegar can work wonders. A mixing ratio of one liter of vinegar to ten cubic meters of water is ideal. Calculate the amount required precisely to eliminate the infestation without leaving any residue and for a long time. Washing soda, vitamin C and s alt can also be used.
