If you want to integrate a tree stump into the garden as a decoration, you want it to last as long as possible to withstand wind and weather. How can the tree stump be sealed in an environmentally friendly way so that it does not decompose so quickly?
How can you seal a tree stump in an environmentally friendly way?
To seal a tree stump in an environmentally friendly way, use linseed oil, wood varnish, tree wax or non-toxic wood varnish. Apply the chosen agent to the dry interfaces to protect against moisture and bacteria and to prevent decomposition.
What means to seal yourself?
The places where the tree was felled must be sealed first and foremost. Moisture and bacteria penetrate particularly easily into the interfaces and decompose the wood. The following remedies are available:
- linseed oil
- Wood varnish
- Wax
- Paint
First of all, what type of tree it is plays a role. Some types of wood are very weather-resistant and can also cope well with wet conditions. They just need to be coated with oil or varnish.
Softer woodwork requires repeated treatment until sealed. Garden retailers offer suitable resources for this purpose. Be sure to use only non-toxic solutions to preserve the stump. This is particularly important when children and pets use the garden.
Seal the tree stump properly
The tree stump should be allowed to dry for some time if possible. Find a time when there is no rain forecast for a long period of time so that the sealant can harden. You may need to apply moisture protection after sealing.
Apply linseed oil or wood varnish with a brush. Sometimes you need to repeat the sealing after a few days.
Tree stump growing
Tree wax is available from specialist retailers. It is applied to the interface with a spatula (€14.00 on Amazon). The thicker the mixture, the longer it takes for the wax to harden.
Seal tree stump with varnish
If you want to decorate the tree stump with decorative objects to beautify the garden, it is usually sufficient to paint the tree stump with wood varnish on a dry day.
Tree stump as a table base
If you want to use the tree stump as a base for a table, you don't need to seal it. By attaching the table top, the stump is protected from moisture.
Tip
One way to easily seal a tree stump is to use wood glue that is slightly diluted. This mixture is applied to the cut site of the tree stump that is as dry as possible. Then the glue just needs to dry thoroughly.