Pool care with s alt: remove algae effectively and cheaply

Table of contents:

Pool care with s alt: remove algae effectively and cheaply
Pool care with s alt: remove algae effectively and cheaply
Anonim

If the once clean pool suddenly becomes infested with algae, you shouldn't wait too long. However, this problem cannot be eliminated only using chemical agents. But how do environmentally friendly home remedies like s alt actually work against algae?

s alt-against-algae-in-the-pool
s alt-against-algae-in-the-pool

How to fight algae in the pool with s alt?

S alt can be used as an environmentally friendly home remedy to remove algae in the pool. A s alt concentration of 0.4 to 0.7 percent is required to effectively combat various types of algae. Meanwhile, the pH value of the pool water should be between 7.00 and 7.40.

Can you get rid of algae in the pool using s alt?

If the pool is overgrown with algae,cana simple household remedy such as table s altcan be used The classic s alt is a chemical algae killer in its own right The effect is insignificant. Although algae are not dangerous in the pool, they should still be removed. The s alt can be used against white, red, black or even green algae in the pool.

What s alt concentration is needed to combat algae in the pool?

In order to thoroughly remove the various types of algae from the pool, you must ensure a s alt concentration of0.4 to 0.7 percent. The s alt can also be used against algae in the pond. However, be sure to pay attention to your pool equipment. These can be affected by the s alt.

Is s alt a good ecological alternative against algae in the pool?

In contrast to chemical algicides, combating algae using s alt is particularlyfriendly for the environment So this is definitely an ecological alternative. In addition, this home remedy for algae in the pool is extremely cheap and available everywhere. In addition, this product is completely harmless and can therefore be used several times.

Tip

The correct pH value of the pool water when fighting algae with s alt

If you use s alt to combat algae growth, you should definitely keep an eye on the pH value of the pool water. Ultimately, this is particularly crucial for the quality of the water. For this reason, measure the pH value at regular intervals. A value between 7.00 and 7.40 is ideal. If there are deviations, this should be regulated as quickly as possible.

Recommended: