Building a cottage garden fence yourself: instructions & tips

Table of contents:

Building a cottage garden fence yourself: instructions & tips
Building a cottage garden fence yourself: instructions & tips
Anonim

Enclosing a cottage garden with a low fence not only helps keep animals out, a pretty fence also has an aesthetic effect. Find out below how you can fence in your cottage garden cheaply and easily.

cottage garden fence
cottage garden fence

How do you design a cottage garden fence?

A cottage garden fence should be made of simple, low and natural wood, e.g. B. made of larch, oak or robinia. A picket or picket fence is suitable for the construction. The slat spacing varies depending on the desired decoration or purpose, e.g. B. for animal defense.

What should a cottage garden fence look like?

Cottage gardens impress with their naturalness and simplicity. A plastic fence would be completely out of place here. But metal doesn't cut a good figure either. It's best to choose a simple, low wooden fence. The fence looks particularly beautiful if it is left natural, i.e. not painted. This also saves a lot of work. However, you may then have to dig a little deeper into your pockets when purchasing the wood.

Which wood for the cottage garden fence?

If you want to leave your fence untreated, you should choose weather-resistant wood. These include:

  • sweet chestnut
  • Douglas fir
  • Teak
  • Robinie
  • Larch
  • Oak

If you want to buy cheaper wood, you should varnish it or treat it with a wood preservative.

Two designs for the cottage garden fence

Two different types of wooden fence are recommended for DIY construction:

  • Picket fence
  • Picket Fence

In a picket fence, the individual slats are nailed to two or more crossbars; in a picket fence, the individual slats are connected with a wire. The picket fence is therefore somewhat easier to build, but also less stable than the picket fence. Below we will explain step by step how you can build a picket or picket fence for your cottage garden.

How many pickets for the fence?

You can decide how close you place the slats according to your taste. If the fence is only to be erected for decorative reasons, you can leave a little more space between the slats, e.g. B. a slat free space between two slats. However, if the fence is intended to keep cats or other animals out, the spaces should be narrow enough to make it impossible to squeeze through. In this case, the fence should also reach to the ground, otherwise you can leave some space here too.

Planning correctly is half the battle

Before you go out to buy the materials, you should plan properly. Proceed as follows:

  • Measure the area to be fenced accurately.
  • Draw a sketch on a piece of paper.
  • Draw the door(s) and when planning the width, keep in mind that a wheelbarrow, for example, should fit through.
  • Stand in pairs where the fence is to be built and discuss the height. If possible, use an assistive device to simulate different heights.
  • Then think about how wide the individual slats should be. Check out price examples and widths online.
  • Then consider how much distance should be maintained between the individual slats.
  • Now calculate how many slats you need.

Tip

During construction, a post should be attached to, for example, every tenth slat, which is then rammed into the ground. Posts must be longer and definitely weatherproof. Alternatively, you can also encase them in concrete or use drive-in sleeves.

Recommended: