Green algae can severely impact the appearance of a once clean pool. In addition, a pool full of algae doesn't invite you to swim and splash around. In order to contain their spread and remove the algae without leaving any residue, a little patience is usually required.
How to remove green algae from the pool?
To eliminate green algae in the pool, you should first remove the algae mechanically, check the pH and chlorine levels, perform shock chlorination, run the pool pump for at least 24 hours and then add an anti-algae agent.
How to get rid of green algae in the pool?
Green algae are one of the types of algae that can be removedrelatively quickly compared to other types. These should first be brushed off with a soft brush and removed thoroughly. Both the pH value and the chlorine content should then be checked. Shock chlorination finally removes the last algae. Be sure to leave the pool pump (€89.00 on Amazon) in operation for a period of at least 24 hours so that all dirt particles can be completely removed and then add an anti-algae agent.
Why do green algae appear in the pool?
Green algae usually arise due toincorrect cleaning of the pool water. The algae usually appear at the beginning of the pool floor and eventually spread further. Contamination such as leaves, hair and other dirt particles can also promote algae formation. If you have not neglected cleaning, check the pH and chlorine levels. Poor values can also be to blame for the growth of the algae.
Do green algae appear particularly often in the pool?
If the pool is affected by algae, it is usually green algae. Theseoccur the most frequently and populate the entire pool. In addition, the pool water turns greenish and becomes cloudy. Remove the green algae immediately after the first sighting. You should use gentle home remedies.
Tip
Vinegar essence against green algae in the pool
If the pool water turns green, it does not need to be replaced completely. A simple home remedy can quickly provide relief. One liter of vinegar is distributed in about 10 cubic meters of water. You should calculate exactly how much vinegar you need for your pool in order to achieve the best possible result. After this procedure, the pH value should be closely monitored.
