A weathered wall can definitely exude a certain charm. In most cases, however, the aging walls tend to disrupt the well-kept overall impression. You can breathe new life into a garden wall made of concrete or wood with the right colors and thereby visually coordinate it with the design of the garden. You can find out what is important in this rejuvenation treatment in the following article.
What is the best way to paint a garden wall?
To paint a garden wall professionally, you should first clean the wall, repair any damage if necessary and apply a suitable primer. Then apply at least three even coats of the chosen color to achieve a consistent and attractive result.
Tool list
- High-pressure cleaner
- Wire brush
- rag
- 150 grit sandpaper
- tarpaulin or awning
- Paint Roller
- Brush
- Scraper grid
- if you want to mix the colors, an additional paint bucket
Material list
Primer and color, matched to the material
The preparation
Only dry, dirt-free masonry produces a beautiful result. Discoloration and moss can be easily removed with the high-pressure cleaner (€105.00 on Amazon). Alternatively, a hard brush and a little soapy water can be used to clean the wall. Use a wire brush to tackle loose paint residues. Then lightly sand the surface with coarse sandpaper.
Check wall for damage
The plaster often crumbles in individual areas. These damaged areas must be repaired before painting. Now let the wall dry thoroughly for a few days so that the paint adheres reliably.
Protect your workplace
If the wall is near large trees, you should protect the work surface from dirt with an awning or a plastic tarp.
Priming ensures better paint durability
This important step is often forgotten. Only by using a primer that is tailored to the surface can you ensure that the paint layer adheres well and does not peel off again within a very short time. Get advice from a specialist retailer and match the base color to the wood or masonry.
Since the primer and the subsequent coat must dry thoroughly, you should keep an eye on the weather forecast for this work and choose a few rain-free days.
The painting
Now it's finally time to paint the wall. Stir the paint according to the manufacturer's instructions and paint the surface quickly and evenly from top to bottom. We recommend at least three coats that are not too thick.
Tip
If you want to paint the wall colorfully and show it in the public area, permission may be necessary. Unfortunately, it is often the case that the redesign is not allowed to change the streetscape. Therefore, please contact the relevant municipality in advance about the regulations that apply in your area.
