Removing ivy from a wall can be strenuous because the tendrils, which are firmly attached by roots, leave behind stubborn residue. But there are various machines that prove to be extremely helpful in this work.
Can you remove ivy from the facade with machines?
Yes,Flame device, high-pressure cleaner, sandblasting device or grinder can,depending on the surface, be useful in this work and remove the remaining adherent roots of theivy However, ivy cannot always be removed from the wall completely and without leaving any residue, even using machines.
Can you flame ivy with a machine?
Ifahouse facade is absolutely solid and fireproof, you cansuccessfully remove the ivy residue with a flame device for weedsget to grips with it. However, this is not entirely risk-free, as the fire can unintentionally take on a life of its own.
Therefore, you must first make sure that no insulation made of polystyrene rigid foam, wood fiber, cork or hemp has been installed. With these combustible materials there is a risk that they will ignite due to the heat generated by the device and that an invisible source of fire will occur behind the wall paneling.
How do you remove ivy with the flame device?
With the flame device you can char theremnants of ivy andrelatively easilyremove:
- First tear off the vines.
- Charr the remaining adhesive roots with the machine.
- Brush off any residue.
- If necessary, paint over any light brown areas that are still visible.
Is the high-pressure cleaner suitable for removing ivy?
The smoother the wall is plastered,the residue-free the root residue can be rinsed off with a high-pressure cleaner:
- Use hot water and add a lime-dissolving cleaner to it.
- Keep moistening the ivy well.
- Scrape off any remaining swollen root pieces with a brush or the dirt blaster for a high-pressure cleaner.
Can I sand ivy off the wall with a sander?
There are grinding machines that are suitable forquick and easy removal of ivy from house walls. However, this usually doesn't happen without damage such as chipped plaster and sanded paint.
After removing ivy from the walls, they often need to be renovated. A new coat of paint is also necessary in many cases.
Can ivy be removed using sandblasting?
With these machines you can remove ivy residuewithout chemicals and manual after-treatmentrelatively uncomplicated. The compressed air jets are used with a special blasting agent are offset, simply aimed at the remains of ivy on the wall.
This process protects the substrate and can be used on clinker brick facades as long as they are not high-gloss. It is advisable to have the ivy removed with the sandblasting device carried out by a specialist company, as the wrong approach can lead to massive damage to the house wall.
Tip
Getting ivy off wooden walls
You should avoid using machines on wooden walls or old half-timbered houses. Instead, cut the ivy piece by piece with pruning shears and tear the pieces of shoots from the wall. If the entire house is overgrown, it is advisable to hand over this laborious work to a specialist company.
