How wide a beech hedge becomes depends on the space available and your personal taste. However, pay attention to the minimum width required for a beech hedge. If possible, consider the future width of your beech hedge when planning.
What width should a beech hedge have?
The minimum width of a red beech hedge is 40 to 50 centimeters, while the height should be at least 70 centimeters. For a wider hedge, the width can easily be increased to one meter or more. Make sure there is enough space and easy access for grooming and trimming.
How wide is a red beech hedge at least?
You decide the width and height of your beech hedge yourself. You can cut the hedge narrow or wide as you like.
- Minimum width between 40 and 50 centimeters
- Minimum height around 70 centimeters
- maximum hedge height approx. 4 meters
The minimum width of a red beech hedge is 40 to 50 centimeters. You should not cut beech hedges any narrower. If you want a very wide hedge, you can easily make it a meter or more wide.
If you have little space in your garden, you should consider planting a hornbeam hedge. You can cut hornbeams as narrow as a board if you want.
How to quickly get a wide beech hedge
It takes time for a beech hedge to reach a width of one meter or more. But you can speed things up.
Plant the beech hedge in two rows. Two rows are created 50 centimeters apart. The copper beeches are planted in a staggered manner.
The branches quickly fill up the space in the middle and you get a very thick hedge in a short time. By the way, you won't be able to see much of it later if you trim the beech hedge regularly.
What else should you pay attention to when choosing the width of the beech hedge
The wider the beech hedge, the more difficult it is to care for, especially cutting.
You can hardly work a width of one meter or more from the ground. Cutting is then only possible with a ladder or scaffolding (€688.00 on Amazon) and is therefore very time-consuming.
Also think about the distance between the beech hedge and buildings and sidewalks. Leave enough space so that you can trim the hedge from behind without any problems.
Tip
Common beech hedges should be cut conically. This means that the hedge is kept wider at the bottom than at the top. This means that the lower parts of the plant receive more light and do not go bald as quickly.