Constantly lifting the watering can over the edge of the rain barrel to get the water? That can be quite tiring. An integrated outlet tap is much more useful. Here you simply have to turn on the tap and the water flows into your watering can all by itself. Assembly is not difficult at all, as these instructions prove.
How do I install a drain tap on a rain barrel?
To install a drain tap on a rain barrel, first check for an existing hole, otherwise you will drill one. Attach the faucet with screws, making sure it is secure and at a suitable height above the ground so that a watering can can fit underneath.
Why is a drain tap useful?
- Easy removal of irrigation water
- For emptying the rain barrel in winter
- Precise dosage when withdrawing water
- Water withdrawn is free of leaves or algae from the rain barrel
Where can I get a drain tap?
Most of the time, when you buy a rain barrel, it comes with a drain tap. With a bit of luck, all materials and detailed assembly instructions are included. Otherwise, you can buy a tap (€11.00 on Amazon) in any well-stocked garden center.
When do I install the outlet tap
It is important that you attach the outlet tap before you start with the rest of the preparations. Assembling the rain barrel should always be done first. Only with the complete model is it possible to precisely plan the location and connect other helpful utensils. In addition, the rain barrel is initially movable and can be turned on its side as desired.
How do I proceed?
- Check whether there is already a pre-punched hole for the outlet tap.
- Cut out the material at this point.
- Otherwise, drill a hole in the rain barrel.
- Fix the outlet tap with screws.
- Check your construction for a tight fit and a suitable height.
At what height do I install the outlet tap?
The drain tap is installed in the lower area of the rain barrel. You should still keep a little distance from the ground. If you have placed your rain barrel on the pedestal, a watering can should fit under the tap without any problems.
What do I have to pay attention to?
The outlet tap must be stable and vertical. When drilling the hole, you should pay attention to clean workmanship and securely seal any leaks.
