Make lawnmowers quieter: Simple tips for reducing noise

Table of contents:

Make lawnmowers quieter: Simple tips for reducing noise
Make lawnmowers quieter: Simple tips for reducing noise
Anonim

When the lawn mower makes loud, rattling noises, it gets on the nerves of the operator and the neighborhood. If the noise level suddenly increases when mowing the lawn, you can solve the problem with a simple measure. You can find out how to do this here.

make the lawnmower quieter
make the lawnmower quieter

How can I make my lawnmower quieter?

To make a lawnmower quieter, consider replacing a damaged blade. To do this you will need a new knife, screws, washers and a wrench. With a correct knife, vibrations and noise levels are reduced.

Battered blades make the lawn mower noisy

Collision with a stone is enough to seriously damage the blade bar of a lawnmower. As a result, the device vibrates and emits unmistakable rattling noises. In combination with the already loud petrol engine, the noise pollution takes on unimagined dimensions. To make your lawnmower work more quietly again, you should replace the broken blade.

New blade makes the lawn mower quieter - this is how the replacement works

To replace the chipped knife bar, all you need is a new, correct model (€17.00 on Amazon), new screws with washers and a wrench. Before you start the actual assembly work, please pull the plug from the spark plug and turn off the fuel tap. How to properly replace a lawnmower blade:

  • Tilt the lawn mower to the side so that the spark plug and air filter point upwards
  • Block the knife bar with a piece of wood
  • Stabilize the knife with one hand to loosen the screws with the other hand
  • Remove the old knife bar using slight twisting movements

Please note that some lawn mower models have screws with a left-hand thread at this point. Place the new lawn mower blade exactly onto the screw opening and screw in the screws and washers. For safety reasons, we recommend a torque wrench for this work so that you can screw in the screws precisely according to the manufacturer's instructions.

Once the new blade bar is in place, tip the lawnmower back onto its wheels. Place the spark plug connector on the spark plug and turn on the fuel tap. The next time you cut the lawn, your lawn mower will run as quietly as it did on the first day.

Tip

It is in the nature of things that petrol lawnmowers work much more noisily than electric mowers. If you generally have a problem with the loud engine, we recommend switching to another type of lawn mower that promises whisper-quiet work.

Recommended: